Pool Deck Resurfacing In
Wake Forest, NC

5.0 Google Rating | Licensed & Insured | Authorized SUNDEK Installer | Free Estimates

SUNDEK of NC transforms worn, cracked, and faded pool decks across Wake Forest into slip-resistant, cooler-to-the-touch outdoor surfaces built for North Carolina summers. Custom finishes, professional installation, and free estimates.

Wake Forest's Pool Deck
Resurfacing Specialists


Wake Forest has grown fast, and the pool decks in its newer neighborhoods are starting to show it. Builder-grade concrete — common in the subdivisions that went up across northern Wake County through the 2000s and 2010s — tends to be thinner and less finished than homeowners realize until surface wear sets in. Fading, surface erosion, and minor cracking often appear earlier than expected, and standard sealing only goes so far. SUNDEK of NC installs professional pool deck resurfacing systems that go beyond sealing — repairing surface damage, upgrading texture for slip resistance, and delivering a custom finish that holds up to Wake Forest's summers without the cost or disruption of a full replacement. The result is a pool deck that looks the way it should have from the start.
A multi-level backyard featuring an infinity-edge swimming pool, set against a natural lake backdrop. The pool area features a decorative concrete deck with a distinct pattern of large gray textured sections bordered by wide tan and dark brown smooth pavers.

Why Wake Forest Homeowners Choose SUNDEK of NC


Slip-Resistant Surfaces
Built for Wet Conditions

Pool decks are slippery by nature — wet feet, splashing water, and smooth concrete are a dangerous combination. SUNDEK's resurfacing systems include textured finish options that significantly improve traction around the water's edge, reducing slip-and-fall risk for families and guests.

Heat-Reflective Finishes
That Stay Cooler Underfoot

Concrete absorbs heat. On a July afternoon in Wake Forest, an uncoated pool deck can reach temperatures that make barefoot walking painful. SUNDEK's coating systems include heat-reflective finish options that keep surface temperatures significantly cooler so your deck stays comfortable all summer.

Custom Colors and
Decorative Finishes

Resurfacing is an opportunity to completely transform the look of your pool area. SUNDEK of NC offers a wide range of colors, textures, and decorative finish options. From natural stone looks to clean modern tones, there’s looks that match your home's style and existing landscaping.

A wide-angle view of a freeform inground swimming pool with light blue water and a gray stamped concrete border. A small, circular elevated hot tub with a stone veneer base is connected to the pool's edge. The surrounding patio is a light gray knockdown-textured concrete.

Our Pool Deck Resurfacing
Process in Wake Forest


  • Free On-Site Estimate

    We visit your Wake Forest property, assess your existing deck's condition — including cracks, surface erosion, drainage, and coating suitability. Then, we’ll go over your options and provide a detailed, written estimate at no charge.

  • Surface Preparation

    Proper prep is the most important part of any resurfacing job. We clean the deck thoroughly, perform mechanical profiling to improve coating adhesion, and repair cracks, chips, or surface voids before any coating is applied.

  • Coating Application

    We apply your selected SUNDEK coating system using manufacturer-approved techniques that ensure uniform coverage, strong adhesion, and a consistent finish across the entire deck — edges, steps, and drains included.

  • Final Walkthrough

    Before we leave, we walk the finished project with you to confirm quality, review care instructions, and make sure the result meets your expectations. Most residential pool deck projects are complete within two to four days.

Our Pool Deck Resurfacing
Process in Wake Forest

  • Free On-Site Estimate
    We visit your Wake Forest property, assess your existing deck's condition — including cracks, surface erosion, drainage, and coating suitability. Then, we’ll go over your options and provide a detailed, written estimate at no charge.

  • Surface Preparation
    Proper prep is the most important part of any resurfacing job. We clean the deck thoroughly, perform mechanical profiling to improve coating adhesion, and repair cracks, chips, or surface voids before any coating is applied.

  • Coating Application
    We apply your selected SUNDEK coating system using manufacturer-approved techniques that ensure uniform coverage, strong adhesion, and a consistent finish across the entire deck — edges, steps, and drains included.

  • Final Walkthrough
    Before we leave, we walk the finished project with you to confirm quality, review care instructions, and make sure the result meets your expectations. Most residential pool deck projects are complete within two to four days.

A wide-angle view of a freeform inground swimming pool with light blue water and a gray stamped concrete border. A small, circular elevated hot tub with a stone veneer base is connected to the pool's edge. The surrounding patio is a light gray knockdown-textured concrete.

Pool Deck Resurfacing Projects in Wake Forest


A kidney-shaped in-ground swimming pool with deep blue water, surrounded by a light gray stippled decorative concrete deck. The backyard space includes a wooden pergola, a screened-in porch with a wooden staircase, and a tiered stone retaining wall.
High-angle view of a rectangular in-ground pool with a submerged sun shelf and two white lounge chairs. The pool is surrounded by light blue stamped concrete tile-patterned decking and a border of smooth river rocks and large boulders.
A kidney-shaped in-ground pool with dark blue water and an integrated spillover spa, surrounded by a light beige stippled decorative concrete deck. The pool area is bordered by a curved stacked-stone retaining wall, a wooden fence, and a small tan storage shed in the background.
A small, rectangular turquoise plunge pool with built-in steps, surrounded by a light gray stippled decorative concrete deck. The deck is divided into large rectangular tiles by thin grout lines and features a dark gray textured border.

What Wake Forest Homeowners Say About Sundek of NC



“Outstanding Experience from Start to Finish. The entire process was outstanding—from working with Brandon on estimates and project planning to the delivery team, led by Ariana, who exceeded our expectations. We had 17-year-old stamped concrete decking around our pool area, and the transformation they achieved was nothing short of magical. They did an incredible job repairing major flaws and cracks, bringing new life to the space. I would recommend them over any other resurfacing company out there!”
- Bob Sarubbi

“Sundek is a wonderful company to do business with. Our 19 year old pool deck was in terrible shape, we thought we might have to just replace the concrete. We looked online for other options and found Sundek. A young man came out and told me about their product. The crew that came out were polite and professional and they did a fantastic job. Our pool deck has never looked so good. We could not be happier.”
- Michelle Dillon

Pool Deck Resurfacing in Wake Forest, NC —
Frequently Asked Questions


Pool deck resurfacing in Wake Forest typically costs between $3 and $8 per square foot, depending on the size of the deck, the condition of the existing surface, and the finish system selected. A standard residential pool deck runs between $2,000 and $6,500 for most Wake Forest homeowners. Resurfacing is significantly more cost-effective than full deck replacement, which can run $10,000 or more. Contact SUNDEK of NC for a free estimate specific to your project.

Ready to Resurface Your Wake Forest Pool Deck?


Request your free, no-obligation estimate today and work with a team that knows Wake Forest style.